Products
Reliable Stability Stable Reading Range of Maximum 10M
If used with IDA245/IDA245H2 Active Tag, reading range can be selected up to 10 M depending on the installation environment.
RF245-2 : 2m(6.5ft), RF245-3 : 3m(10ft),
RF245-5 : 5m(17ft), RF245-10 : 10m(32ft)
Prevents Overlapping Identification Error
The tag of the registered vehicle is stored in the memory to prevent overlapping identification of tags.
Prevention of Multiple Reading in case of Two Vehicles Approaching
The Gate at the Same Time Eliminates multiple readings as it only reads the vehicle’s tag that approaching the sensor (loop coil).
Multiple Card/Tag Identification
Identifies 30 cards per second, which is suitable for logistic tracking when RF tags are attached to the logistics.
90° One-directional Antenna for Long Range Identification
(360° Omni-directional Antenna Selectable) Includes 90° one-directional antenna for stable long range identification.
360° omni-directional antenna is also available for asset tracking and
personal tracking.
Reading Angle Adjustable
If the reader hood is attached to the mounting bracket, it adjusts the reading angle to prevent unnecessary readings from the sides.
High Security Level Encrypted Tag ID Communication
By using the secured algorithms between the reader and the tag, it offers encrypted tag ID communication
Site Code Configuration
Each tag is internally programmed with site code, which makes the readers to read the tags with configured site code. Different areas could be configured with different site codes to strengthen the security level by not allowing the readers to read unregistered tags.





Supports Output for Bar-Gate Control
Offers separate output for bar-gate control to operate the bar-gate control relay. Transistor Output supports up to 100mA of electric current and sends signals for one second.
Both 26 Bit Wiegand Output and RS232 Serial Output Supported
Guarantees stable communication with all devices that supports 26 bit wiegand and RS232 communication.
Outdoor Capacity (Weather-Proofed, IP65)
RF245 can be installed outdoors due to its 100% weather-proofepoxy molding.
Automatic Card Configuration of 125 Channels
The reader automatically configures default channel settings andsite code when power is applied.

RF245-2 : 2m(6.5feet), RF245-3 : 3m(10feet),
RF245-5 : 5m(17 feet), RF245-10 : 10m(32feet)
with IDA245/IDA245H2 Active Tag,
|
Model
|
RF245-2 / RF245-3 / RF245-5 / RF245-10 Long Range Reader Series |
|---|---|
| CPU | Dual 8bit Microprocessor and ISM Band Receiver |
| Read Range | RF245-2(2m, 6.5feet), RF245-3(3m, 10feet), RF245-5(5m, 17feet), RF245-10(10m, 34feet) |
| Mutiple Reading | 30 Tags / second |
| Frequency | 2.45GHz, ISM Band |
| Receiving Site Code | 256 Site Code |
| Modulation | Encrypted GFSK |
| Directivity | 90° One-directional Antenna, 360° Omni-directional Antenna (optonal / Suitable for access control and personnel tracking) |
| Receiver Gain | Better than -80dBm |
| Power / Current | DC12V / Max.50mA |
| Output Format | 26bit Wiegand and RS232, Bargate Output |
| RS232 Format | 9600bps, parity none, 8 Data bits, 1 Stop bit |
| Bargate Output | Max.100mA (Open Collector Output : 1s) |
| OTR (One Time Reading) Control Input |
Low Active Input, DC12V, Max, 50mA Current Drain |
| HOLD Control Input | Low Active Input, DC12V, Max. 50mA Current Drain, Vehicle Detector Input |
| LED Indicator | Built-in Red Color LED |
| Beeper | Built-in Piezo Buzzer |
| Operating Temperature |
-35°C to +65°C (-31°F to +149°F) |
| Operating Humidity | 10% to 90% relative humidity non-condensing |
| Color / Material | Ivory / Polycarbonate / Anodized Aluminum |
| Dimension (W x H x T) |
7.9” x 7.9” x 1.9” (200mm x 200mm x 45mm) |
| Weight | 1.36kg (3.0 lbs) excluding Mounting Bracket |
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()

